Showing posts with label HYB4/3. Show all posts
Showing posts with label HYB4/3. Show all posts

Sunday, December 2, 2012

6-8 HYB 5-Fin...

I shaped this hybrid shape for the older, larger shortboard surfer who has a job, responsibilities and doesn't get to the beach as often as he'd like. Or, for a surfer who is looking for a sub-7' board to add to his quiver of mid-size and/or longboard shapes. The board has a full outline with wide-point very close to center, which is typical of hybrid shapes.. The bottom has relaxed entry rocker with a slight kick in the last 6" to cope with later take-offs. Bottom contours are a subtle single-to-double concave. At 2-5/8", the thickness is in between standard shortboard thickness and standard funboard thickness, striking a balance between paddling power and lower volume.


(BTW, the rocks you see in the photos were covered by 3' of sand prior to this weekend's big swell! Time to break out the booties.)


The five fin-box option allows the rider to experiment with either tri-fin, quad-fin or 5-fin configurations. As a transition board, this shape tries to provide the broadest performance range possible. Dimensions are 13"x20-1/2"x15"  2-5/8". Those interested in the shaping of this board can check here.

Contact me if you're interested in taking this board for a spin.

Friday, June 22, 2012

Blast from the past....

Rummaging around the Lucke Surfboard Factory, I discovered a trove of old Clark Foam blanks and couldn't resist shaping one. With extra thickness and extra width, the Clark 6-9R "Super Blue" density blank was designed with the larger surfer in mind. (Follow this link if you're a surf-design geek and want to knnow the blank specs).
The blank was perfect for a 6-8 "Big Boy" thruster, and Ray said "go for it", so go for it I did. More rummaging produced a suitable template from Ray's collection, and with some subtle modifications this is what I came up with.
Skinned, foiled, rockered and template cut
The board has a full outline which will help the "larger" rider in our typical California conditions, but thickness was kept at 2-5/8" to reduce corkiness. Standard single-to-double concave with slight "V" out the tail. Dims 13" x 20-1/2 x 15".
Rails shaped...
...and ready to glass
Ray is planning on doing this one in a light-yellow resin tint, deck and bottom with red pinline on deck. It'll look sick with red fins. If you've been looking for something like this, shoot Ray an email at raylucke@gmail.com. Not too late to make a color request!

Thursday, February 16, 2012

6-8HYB2+1 for Chad....

Chad had some specific ideas about what he wanted in a surfboard, so I invited him down to the shop, and we collaborated on this neat little hybrid design. For starters, Chad wanted a full-outline design in a short (but not too short) length. He wanted a board with a pretty wide wave-range, but one that he could duck-dive.




Working together with the Aku Shaper software, we came up with this functional little, 2+1 diamond tail hybrid.
Dims are 6'8" 14-3/4" x 21-3/4 x 15-1/2"  2-5/8" thick. Bottom has relaxed entry rocker with single-to-double concaves, and a little "V" out the tail. The board can be surfed as a signle-fin, 2+1 or thruster depending upon mood and conditions. Chad chose to start with an 8-1/2" Frye Flex fin.

Board was finished with "Mercedes Blue" resin tint, orange resin stripe and white pinline. Sanded gloss-coat for matte finish. Glasswork done by Ray Lucke.

Tuesday, August 23, 2011

Just add waves....


 ...preferably shoulder-high or bigger. Here's the new 7-6 HYB4/3 fresh from the factory.

This is a great board for "mature" surfers (you know who you are...) who need a little more float than the 6-6 "Big Boy" thruster gathering dust in the garage, or for the longboarder wanting to sample a little more speed and responsiveness in his/her surfing.
The HYB4/3 shapes feature a full outline with a 15-1/2" wide tail. The full outline is combined with a tightly-tucked 60/40 rail and a single concave bottom with "V" in the last 12". The double-wings help to pull in the tail in the last 12" and work with the "V" to keep turning loose and smooth.
The 4/3 or "5-fin" set-up allows the rider to choose either tri- or quad-fin performance. I like the TA Channel Islands Hexcore fins in front and TA LB Side Bites in the rear on my quad set-ups. The CI template is designed for riders over 180lbs, and offer incredible hold and drive. What I like about the 5-fin set-up is that it offers the rider a wide range of fin configurations, and with FCS plugs there is a huge inventory of fin templates available.
Give me a call or drop me an email if you see an HYB4/3 in your future and want to talk about it. Pricing for the HYB4/3 starts at $465 with quad composite/molded fins included.

Saturday, August 13, 2011

Coming soon to a break in VC...

Took a break in the busy summer season action to build a 7-6HYB4/3 "shop demo" . Here it is shaped, with fin boxes inserted and ready for glassing.




The HYB4/3 is a mid-sized hybrid shape with a single-concave bottom and "V" out the tail. Dimensions are
7-6 13-1/4"x21-3/4"x15" 2-7/8". The double-wing, round-pin tail helps to pull in the wide 15" tail and lends itself to easy turns and smooth cutbacks.



The 4/3 or "5-fin" configuration adds maximum versatility. The board can be surfed as a tri-fin or a quad, depending upon rider preference. I like to use FCS Fusion plugs because there is a wide selection of FCS-based fins to choose from, and the cant of the fins can be set differently.

There is also a 7-8 tri-fin, swallow-tail version of this board at the shop, but it going to a Westlake, CA surfer upon completion.