Showing posts with label Fish. Show all posts
Showing posts with label Fish. Show all posts

Friday, August 30, 2013

New fish for Sam...

Here's the new custom 5-10 fish kneeboard I built for local kneeboarder Sam. If the outline looks "classic", well...that's because it has an impressive pedigree.



Sam had a 5-8 fish kneeboard that was built for him several years ago by hull maestro, Greg Liddle. That board was a copy of a Steve Lis fish kneeboard. Sam brought the 5-8 fish to me, and asked for a similar shape, but longer and thicker. Measurements were taken, templates drawn and fin placement scrutinized. Sam chose the Hobie Fish template from my friends at True Ames Fins. The glass-on fins are asymetrically foiled and were set with just a slight toe-in, adding a little modern touch to this otherwise traditional shape. But the fun part of this build was Sam's direct participation. He was there when I took the rocker measurements, and helped me template the original board. Once I had the blank, Sam watched the whole 4 hr shaping process, and gave me input on what he liked and what he wanted changed, as in "hey Sam, feel these rails and tell me if you want a little more taken off". Shaping a custom surfboard should be a collaboration between shaper and surfer, and I encourage all my customers to participate in the process.


Saturday, August 24, 2013

In progress...

I've got several orders at different stages of glassing. This is a 5-10 Fish kneeboard for Sam.
I really like the glassed-on bamboo fins. Sam was able to watch his board being shaped, so we were really able to custom fit this shape. I really enjoy having customers give me input as I shape their board.
Next is the 8-0 Kingfish for Kirt. 
It's getting one of Kirt's wild color designs so there's not much to see at this point.
Finally, a 9-8 Classic for some lucky customer, yet to be named.  
Deck will stay clear with a red pinline, which should really pop against the Ice Blue resin tint. Isn't this the board you've always wanted? It'll be ready to wax up in about a week, so call me today 805-856-8554

Saturday, November 24, 2012

King Fish for David...

After riding Kirt's KF, David decided he wanted one for himself, but with a few modifications. This 8-0KF is a little smaller overall, with pulled-in nose and tail, thinner rails and just a little less thickness. Final dimensions are 8'0" 16-7/8"x22-1/2"x15-3/4"  3" 64L. The cedar stringer adds a subtle touch of elegance to the uncluttered look of this clear finished custom. David's choice of Hexcore fins by True Ames will allow this shape to perform to its potential.












Tuesday, March 27, 2012

Kirt's Kingfish...

Another colorful addition to Kirt's quiver. This one is an 8-0 King Fish with the optional five-fin setup, allowing him to ride the board as a thruster, a quad, or as a twin with trailer. This board is an EPS/Epoxy shape, with all glassing and color work done by Ray Lucke. Each color block has its own black pinline, in case you're wondering.
Ray and Kirt
Check-out the five fin setup
I added a bump-wing to the tail of this long fish design to keep it from locking up in the turns. Bottom features low rocker throughout, with shallow single-todouble concaves.

Spring is here, and time to start thinking about that new summer board. Smaller surf means more planing area and more volume. Lots of possiblities...lets talk

Saturday, March 24, 2012

Something borrowed...

This is the board I borrowed from Jay. Rode it Tues and Wed at Pipes in clean, 3'-4' conditions, and really had some fun. I also borrowed a 5'6" Mini-Simmons for the trip that Glasser Ray shaped. Surprisingly, I was able to catch 4-5 waves, but just couldn't find the gas pedal. I guess I'll have to lose a few pounds, or build something bigger.
Here's some more Kingfish pix. I surfed Pipes almost every day for years, and then I moved to Barney's, the next break over, where I would go in the wintertime, surfing Terramar in the summer. It was fun going back. Nice being able to wear my 3/2 Mateuse instead of my R3 Patagonia.

Tuesday, March 6, 2012

Naked King Fish...

This 8-0 King Fish is shaped from 2.0lb EPS, which is difficult to handshape, but yields a very light finished board. I had to borrow a planer with a grit drum to do this one. Board will get epoxy resin with one layer of 6-oz S-Glass and one layer of 4-oz E-Glass on deck, and one layer of 6-oz S-glass on bottom. The S-glass is stronger than e-glass without adding more weight. (more expensive, too)
Customer Kirt likes his boards colorful and this one is no exception. But you'll have to wait until next week to see it...

Pros & Cons of EPS/Epoxy Boards: Finished board is probably 30%-40% lighter than comparable polyurethane foam board. Some people like to add extra layers of glass cloth yielding a much more durable board at the same weight of a PU. Hand-glassed EPS boards have great flex properties, and are not near as stiff as the vacuum-bagged, sandwiched construction boards, e.g. Surftech, Boardworks. EPS foam is made of tiny individual foam beads compressed together, leaving air in the teeny-tiny spaces between the foam beads. This air wants to expand when heated. Heated air from the core finds it way to the surface (gas-off) and can form an air pocket between the foam and its fiberglass shell (de-lam). The newer EPS foams do this less but you need to avoid leaving any EPS boards in the direct sun or locked in the car on a hot day. If you live or travel to the tropics, having your shaper install a one-way air-vent is a good idea. EPS foam does not finish-sand as nicely as PU, and small pock-marks are left in the foam. Not a problem if the board is finished "clear" or with opaque resin, but resin color tints are out, and the blank should be sealed before air-spraying color. Epoxy resins are about 30% more costly than polyester resins, so expect the price to be higher for an EPS/Epoxy board.

Saturday, January 29, 2011

Flashback Mod Fish

This was a shape I did a couple of years ago and was one of my favorites.. A 6-4 modern fish with quad fin setup. What was unique about this shape was the use of a slope deck to extend volume out to the rails while still maintaining a nice thin rail. Dimensions are: 6'4" 15” x 20.5” x 15” 2.75”. Board featured LokBox quad fins. As shown in the pix, I first ran the Turbo Speed Dialer fins but didn't like the feel...too "drifty" on hard bottom turns. As a 185lb surfer, I need a little more fin. In a quad setup I like the Taylor Knox fin template in front. It has a 4.68" depth for extra hold and drive. Then I like to use either the smaller LBXM3.8 80/20 foiled rears or just LB side-bite for the rears. It has a 4oz+4oz deck & 6 oz bottom with clear, sanded-gloss finish to add durability while keeping overall weight low. The double-wishbone pinlines (red&blue) give the board a classic look. Glass work was done by West Coast Glass in Encinitas. The board surfed fast but smooth.